KF-150PS is a poly heat sealer. It makes a perfect strong 6" long and 1/18" wide seal on poly bag and other thermoplastic materials. The upper jaw holds the metal sealing bar with a 275 degree F sealing temperature and is covered with a Teflon cloth. The bottom jaw holds the resilient silicone rubber. It seals polyethylene or polypropylene up to 6 mil thick. The unit is heavy duty with high impact ABS thermal plastic casting. Warm-up time is 15 minutes. 110V/25W

Poly Heat Sealer
ITEM: Sealer KF-150PS
WT: 4 lbs

$95.00

KF-150CST is a Teflon coated direct heat sealer, equipped with 2 heated 9/16" (15mm) wide and 6" long serrated jaw. It is ideal for sealing cellophane, coated aluminum foil, kraft paper, and coffee bags. The temperature switch has 2 temperature settings, 350 & 450 degrees Fahrenheit. This unit gives a serrated horizontal lines seal. 110V/50W

Teflon Coated Direct Heat Sealer
ITEM: Sealer KF-150CST
WT: 4 lbs

$132.00

KF-150 series can be used by hand, on a table or by foot pedal. The pedal and clamp set is an optional accessory, which can be purchased individually. The sealer can be clamped anywhere on a table, and the sealing operation can be done using the foot pedal. No special stand and screws for mounting are necessary.

Pedal & Clamp Set
ITEM: Sealer PC-SET
WT: 5 lbs

$47.50

The Clam Shell Sealer is equipped with two heated 3/8" wide and 10mm long serrated jaws. It has two temperature settings, 180 & 210 degree C (350 & 450 degree F). Ideal for sealing poly packing cases such as clam shell and other similar types of containers. Handles remain cool during operation. The sealer can be used in the voltage range of 100-240v.

Clam Shell Sealer
ITEM: Sealer KF-772DH
WT: 1 lbs

$96.25

Aspal On-Pack (PT-V) Ultrasonic Clam Shell Sealer is an ultrasonic welder. Material is welded by using ultrasonic wave. It is safe and easy to operate. The sealing jaw is 3mm x 6mm. The oscillating frequency is 60 khz. Ideal for sealing clam shells or for tacking. No warm -up time needed.

Ultrasonic Clam Shell Sealer
ITEM: Sealer PC-SET ASPAL On-Pak(PT-V)
WT: 5 lbs

The heated bar is 10". Ideal for sealing irregular packages. Great care is needed in using this gadget. Optional 12" working mat is available.

Heat Wand
ITEM: Sealer WT-250
WT: 1 lbs

The heat hand wheel sealer gives a 5mm or meshed seal. The diameter of the Teflon coated wheel is 2 1/4". It is ideal for sealing irregular Polyethylene and cellophane packages. Temperature can be adjusted from 80-240 degrees Fahrenheit. Great care is needed in using this sealer. Units comes with a safety rack and a 12" square heat resistance mat.

Hand Wheel Sealer 5mm
ITEM: Sealer HWS-802HW
WT: 3

The heat hand wheel sealer gives a 10mm or meshed seal. The diameter of the Teflon coated wheel is 2 1/4". It is ideal for sealing irregular Polyethylene and cellophane packages. Temperature can be adjusted from 80-240 degrees Fahrenheit. Great care is needed in using this sealer. Units comes with a safety rack and a 12" square heat resistance mat.

Hand Wheel Sealer 10mm
ITEM: Sealer HWS-803HW
WT: 3 lbs